Mutoh Media
- Overview
- Spec Sheets
- Profiles
A Complete Solution
Mutoh’s exceptional line of media offers 8 carefully tested, profiled
and certified products that have been selected specifically for their
print quality, durability and consistant print results on Mutoh printers. Choose from gloss or matte vinyl in either permanent or removable or banner materials in either matte, smooth or gloss scrim.
The Secret Is In The Science
Mutoh 3 Mil Gloss Vinyl Permanent - 3-mil premium white gloss flexible calendared vinyl film coated with 200-5000 permanent acrylic pressure sensitive adhesive laminated to a 90# layflat liner. This film is designed to accept a variety of solvent-based inkjet and UV curable inks common to wide format digital printing systems.
Mutoh 3 Mil Gloss Vinyl Removable - 3-mil premium white gloss flexible calendared vinyl film coated with 200-4982 removable acrylic pressure sensitive adhesive laminated to a 90# layflat liner. This film is designed to accept a variety of solvent-based inkjet and UV curable inks common to wide format digital printing systems.
Mutoh 3.4 Mil Matte Vinyl Permanent- 3.4-mil premium white matte flexible calendared PVC film coated with 200-5000 permanent acrylic pressure sensitive adhesive laminated to a 90# layflat liner. This film is designed to accept a variety of solvent-based inkjet and UV curable inks common to wide format digital printing systems.
Mutoh 3.4 Mil Matte Vinyl Removable - 3.4-mil premium white matte flexible calendared vinyl film coated with 200-4982 removable acrylic pressure sensitive adhesive laminated to a 90# layflat liner. This film is designed to accept a variety of solvent-based inkjet and UV curable inks common to wide format digital printing systems.
Mutoh 12oz Smooth DS Banner - 14-mil 2-sided Vinyl Banner Media. This opaque media has a high tenacity polyester core sandwiched with White Vinyl on both sides. This Banner Media is designed to accept most solvent-based inkjet and UV curable inks used in wide format digital printing systems.
Mutoh 13oz "Matte" Scrim Banner - 15-mil 1-sided Vinyl Banner Media. This media has a high tenacity polyester core sandwiched with White Vinyl on both sides. This Banner Media is designed to accept most solvent-based inkjet and UV curable inks used in wide format digital printing systems.
Mutoh 13oz "Gloss" Scrim Banner - 15-mil 1-sided Vinyl Banner Media. This media has a high tenacity polyester core sandwiched with White Vinyl on both sides. This Banner Media is designed to accept most solvent-based inkjet and UV curable inks used in wide format digital printing systems.
Mutoh Media Specification
Product Codes
MGCV30-PA (30” X 150’ roll)
MGCV54-PA (54” X 150’ roll)
MGCV60-PA (60” X 150’ roll)
MGCV54-PA (54” X 150’ roll)
MGCV60-PA (60” X 150’ roll)
Applications
MUTOH 3 Mil Gloss Vinyl Permanent is designed for temporary interior or exterior signage, decals, nameplates, die-cut letters and point-of-purchase displays.
Thickness
Film 3.0 mils.
Adhesive .8 to 1.0 mils.
Liner 6.7 mils.
(Thickness variance +/- 10%)
Adhesive .8 to 1.0 mils.
Liner 6.7 mils.
(Thickness variance +/- 10%)
Dimensional Stability
Good.
Temperature Ranges
Minimum application temperature is +40°F.
Service temperature is -40°F to +180°F.
Service temperature is -40°F to +180°F.
Expected Exterior Exposure
Removable up to 1 year under normal conditions.
Adhesion
To glass 5 to 15 oz. /in.
To standard test panels 5 to 15 oz. /in.
Tested according to PSTC-1 with 24-hour dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production.
To standard test panels 5 to 15 oz. /in.
Tested according to PSTC-1 with 24-hour dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production.
Water Resistance
Good.
Test if immersed.
Test if immersed.
Humidity Resistance
Good.
Solvent Resistance
Good.
Storage Stability
6 months shelf life when stored at 70°F and 50% relative humidity.
Recommendations
Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in vinyl degradation.
MUTOH 3 Mil Gloss Vinyl Removable
Product Codes
MGCV30-PA (30” X 150’ roll)
MGCV54-PA (54” X 150’ roll)
MGCV60-PA (60” X 150’ roll)
MGCV54-PA (54” X 150’ roll)
MGCV60-PA (60” X 150’ roll)
Applications
MUTOH 3 Mil Gloss Vinyl Removable is designed for temporary interior or exterior signage, decals, nameplates, die-cut letters and point-of-purchase displays.
Thickness
Film 3.0 mils.
Adhesive .8 to 1.0 mils.
Liner 6.7 mils.
(Thickness variance +/- 10%)
Adhesive .8 to 1.0 mils.
Liner 6.7 mils.
(Thickness variance +/- 10%)
Dimensional Stability
Good.
Temperature Ranges
Minimum application temperature is +40°F.
Service temperature is -40°F to +180°F.
Service temperature is -40°F to +180°F.
Expected Exterior Exposure
Removable up to 1 year under normal conditions.
Adhesion
To glass 5 to 15 oz. /in.
To standard test panels 5 to 15 oz. /in.
Tested according to PSTC-1 with 24-hour dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production.
To standard test panels 5 to 15 oz. /in.
Tested according to PSTC-1 with 24-hour dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production.
Water Resistance
Good.
Test if immersed.
Test if immersed.
Humidity Resistance
Good.
Solvent Resistance
Good.
Storage Stability
6 months shelf life when stored at 70°F and 50% relative humidity.
Recommendations
Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in vinyl degradation.
MUTOH 3.4 Mil Matte Vinyl Permanent
Product Codes
MGCV30-PA (30” X 150’ roll)
MGCV54-PA (54” X 150’ roll)
MGCV60-PA (60” X 150’ roll)
MGCV54-PA (54” X 150’ roll)
MGCV60-PA (60” X 150’ roll)
Applications
MUTOH 3.4 Mil Matte Vinyl Permanent is designed for interior or exterior signage, decals, nameplates, die-cut letters and point-of-purchase displays.
Thickness
Film 3.4 mils.
Adhesive 9 to 1.1 mils.
Liner 6.7 mils.
(Thickness variance +/- 10%)
Adhesive 9 to 1.1 mils.
Liner 6.7 mils.
(Thickness variance +/- 10%)
Dimensional Stability
Good.
Temperature Ranges
Minimum application temperature is +40°F.
Service temperature is -40°F to +180°F.
Service temperature is -40°F to +180°F.
Expected Exterior Exposure
Up to 5 years
Adhesion
To stainless steel - 40 oz/in.
PSTC-101 Method A with 24 hr. dwell at 70°F and 50% relative humidity.
Typical values. Individual values may vary.
Test thoroughly for your specific use.
PSTC-101 Method A with 24 hr. dwell at 70°F and 50% relative humidity.
Typical values. Individual values may vary.
Test thoroughly for your specific use.
Water Resistance
Good.
Test if immersed.
Humidity Resistance
Good.
Solvent Resistance
Good.
Storage Stability
6-month shelf life when stored at 70°F and 50% relative humidity.
Recommendations
Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in vinyl degradation.
MUTOH 3.4 Mil Matte Vinyl Removable
Product Codes
MGCV30-PA (30” X 150’ roll)
MGCV54-PA (54” X 150’ roll)
MGCV60-PA (60” X 150’ roll)
MGCV54-PA (54” X 150’ roll)
MGCV60-PA (60” X 150’ roll)
Applications
MUTOH 3.4 Mil Matte Vinyl Removable is designed for temporary interior or exterior signage, decals, nameplates, die-cut letters and point-of-purchase displays.
Thickness
Film 3.4 mils.
Adhesive .8 to 1.0 mils.
Liner 6.7 mils.
(Thickness variance +/- 10%)
Adhesive .8 to 1.0 mils.
Liner 6.7 mils.
(Thickness variance +/- 10%)
Dimensional Stability
Good.
Temperature Ranges
Minimum application temperature is +40°F.
Service temperature is -40°F to +180°F.
Service temperature is -40°F to +180°F.
Expected Exterior Exposure
Removable up to 1 year under normal conditions.
Adhesion
To glass 5 to 15 oz. /in.
To standard test panels 5 to 15 oz. /in.
Tested according to PSTC-1 with 24-hour dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production.
To standard test panels 5 to 15 oz. /in.
Tested according to PSTC-1 with 24-hour dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production.
Water Resistance
Good.
Test if immersed.
Humidity Resistance
Good.
Solvent Resistance
Good.
Storage Stability
6 months shelf life when stored at 70°F and 50% relative humidity.
Recommendations
Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in vinyl degradation.
12 oz. Mutoh Smooth Banner
Product Codes
MSDSB38 (38” X 150’ roll)
MSDSB54 (54” X 150’ roll)
MSDSB64 (64” X 150’ roll)
MSDSB54 (54” X 150’ roll)
MSDSB64 (64” X 150’ roll)
Weight
12oz / square yard
[FS-191-5041]
[FS-191-5041]
Base Fabric
100% Polyester - Knit
[DIN EN ISO 1049-2 / 2060] [24x30 / 250Dx250D]
[DIN EN ISO 1049-2 / 2060] [24x30 / 250Dx250D]
Tensile Strength
85 lbs x 80 lbs
[FS-191-5102 -grab]
[FS-191-5102 -grab]
Tear Resistance
7 lbs x 7 lbs
[FS-191-5134 -tongue]
[FS-191-5134 -tongue]
Adhesion
at least 6 lbs / inch
[FS-191-5970]
[FS-191-5970]
Temperature Resistance
-22° F ~ 158° F
[FS-191-5874]
[FS-191-5874]
U.V. Resistance
Not excessive fading after 1,000 HRS
[Weather-O-Meter]
[Weather-O-Meter]
Flame Resistance
Pass
Finish
6 months shelf life when stored at 70°F and 50% relative humidity.
Recommendations
Matte Finish
13 oz. Mutoh Matte Scrim Banner
Product Codes
MSDSB38 (30” X 150’ roll)
MSDSB54 (54” X 150’ roll)
MSDSB64 (64” X 150’ roll)
MSDSB54 (54” X 150’ roll)
MSDSB64 (64” X 150’ roll)
Weight
13oz / square yard
[FS-191-5041]
[FS-191-5041]
Base Fabric
[DIN EN ISO 1049-2 / 2060]
100% Polyester - Knit
[9x9 / 1000Dx1000D]
Tensile Strength
240 lbs x 235 lbs
[FS-191-5102 -grab]
[FS-191-5102 -grab]
Tear Resistance
75 lbs x 65 lbs
[FS-191-5134 -tongue]
[FS-191-5134 -tongue]
Adhesion
at least 8 lbs / inch
[FS-191-5970]
[FS-191-5970]
Temperature Resistance
-22° F ~ 158° F
[FS-191-5874]
[FS-191-5874]
U.V. Resistance
Not excessive fading after 1,000 HRS
[Weather-O-Meter
[Weather-O-Meter
Flame Resistance
Pass
Finish
Matte Finish
Recommendations
This media is designed for exterior and interior sign and banner applications. In any exterior application, care should be taken to reinforce hems with webbing and “D” rings attached to the webbing. Grommets should be through the webbing reinforced hems. Fasten securely at all four corners and at grommet points to prevent wind flapping. Wind-whip can cause a banner to self-destruct.
Store in a cool dry area. Prolonged exposure to heat will shorten the shelf life and printability of this media. Standard shelf life is 1 year.
When rolling banners for shipping or storage, care should be taken to make sure the ink has completely cured. Inks not completely cured may re-wet and block.
Store in a cool dry area. Prolonged exposure to heat will shorten the shelf life and printability of this media. Standard shelf life is 1 year.
When rolling banners for shipping or storage, care should be taken to make sure the ink has completely cured. Inks not completely cured may re-wet and block.
13 oz. Mutoh Matte Scrim Banner
Product Codes
MSDSB38 (38” X 150’ roll)
MSDSB54 (54” X 150’ roll)
MSDSB64 (64” X 150’ roll)
MSDSB54 (54” X 150’ roll)
MSDSB64 (64” X 150’ roll)
Weight
13oz / square yard
[FS-191-5041]
[FS-191-5041]
Base Fabric
[DIN EN ISO 1049-2 / 2060]
100% Polyester - Knit
[9x9 / 1000Dx1000D]
Tensile Strength
240 lbs x 235 lbs
[FS-191-5102 -grab]
[FS-191-5102 -grab]
Tear Resistance
75 lbs x 65 lbs
[FS-191-5134 -tongue]
[FS-191-5134 -tongue]
Adhesion
at least 8 lbs / inch
[FS-191-5970]
[FS-191-5970]
Temperature Resistance
-22° F ~ 158° F
[FS-191-5874]
[FS-191-5874]
U.V. Resistance
Not excessive fading after 1,000 HRS
[Weather-O-Meter]
[Weather-O-Meter]
Flame Resistance
Pass
Finish
Gloss Finish
Recommendations
This media is designed for exterior and interior sign and banner applications. In any exterior application, care should be taken to reinforce hems with webbing and “D” rings attached to the webbing. Grommets should be through the webbing reinforced hems. Fasten securely at all four corners and at grommet points to prevent wind flapping. Wind-whip can cause a banner to self-destruct.
Store in a cool dry area. Prolonged exposure to heat will shorten the shelf life and printability of this media. Standard shelf life is 1 year.
When rolling banners for shipping or storage, care should be taken to make sure the ink has completely cured. Inks not completely cured may re-wet and block.
Store in a cool dry area. Prolonged exposure to heat will shorten the shelf life and printability of this media. Standard shelf life is 1 year.
When rolling banners for shipping or storage, care should be taken to make sure the ink has completely cured. Inks not completely cured may re-wet and block.
14oz Mutoh Smooth DS Banner
Product Codes
MSDSB38 (38” X 150’ roll)
MSDSB54 (54” X 150’ roll)
MSDSB64 (64” X 150’ roll)
MSDSB54 (54” X 150’ roll)
MSDSB64 (64” X 150’ roll)
Weight
14oz / square yard
[FS-191-5041]
[FS-191-5041]
Base Fabric
[DIN EN ISO 1049-2 / 2060] [24x30 / 250Dx250D]
100% Polyester - Knit
[9x9 / 1000Dx1000D]
Tensile Strength
85 lbs x 80 lbs
[FS-191-5102 -grab]
[FS-191-5102 -grab]
Tear Resistance
7 lbs x 7 lbs
[FS-191-5134 -tongue]
[FS-191-5134 -tongue]
Adhesion
at least 6 lbs / inch
[FS-191-5970]
[FS-191-5970]
Temperature Resistance
-22° F ~ 158° F
[FS-191-5874]
[FS-191-5874]
U.V. Resistance
Not excessive fading after 1,000 HRS
[Weather-O-Meter]
[Weather-O-Meter]
Flame Resistance
Pass
Finish
Matte Finish
Recommendations
This media is designed for interior and smaller short-term exterior sign and banner applications. In any exterior application, care should be taken to reinforce hems with webbing and “D” rings attached to the webbing. Grommets should be through the webbing reinforced hems. Fasten securely at all four corners and at grommet points to prevent wind flapping. Wind-whip can cause a banner to self-destruct.
Store in a cool dry area. Prolonged exposure to heat will shorten the shelf life and printability of this media. Standard shelf life is 1 year.
When printing two-sided, allow the first printed side to cure completely before printing the second side. Printing the second side before the first is completely cured may allow the inks to re-wet and block.
Store in a cool dry area. Prolonged exposure to heat will shorten the shelf life and printability of this media. Standard shelf life is 1 year.
When printing two-sided, allow the first printed side to cure completely before printing the second side. Printing the second side before the first is completely cured may allow the inks to re-wet and block.
Find the right printer for you
Spec
Sheets
Find a dealer near you
Order
a
print sample
a
print sample
Learn about Mutoh Media
Home | Privacy | Terms | Contact | Testimonials 
